Options Include The Following

Standard Autopad[R] MA-0001

This is the "machine" part of the AutoPad[R]. It is designed to work in conjunction with a Remote Box which contains the operator controls. The machine connects to the remote box via a connector, allowing quick changing of remote boxes when necessary fo

Pad-N-Pak[TM] MA-0002

This machine is similar to the standard machine, except the machine is mounted on a cart to facilitate use with a Pad-N-Pak[R] workstation with or without shelves.

Autofeed KA-0300 Remote Box

This remote is equipped with a timer which is adjustable by the user and sets the pad length. Cutting is accomplished by simultaneously pressing two cut push-buttons. After the cut is complete, another pad is fed out automatically. The user can feed ou

Autofeed w/Feed-Cut Footswitch KA-0301

This remote box is the same as KA-0300 with the additional feature of feed-cut footswitch operation. When the operator selects feed-cut footswitch operation, the machine feeds out a pad while the footswitch is being depressed. When the footswitch is rel

3 Position KA-0302 Remote Box

This remote box offers three modes of operation, selectable by the operator. One mode is Autofeed. In this mode, the machine is equipped with a timer which is adjustable by the user and sets the pad length. Cutting is accomplished by simultaneously pre

The second mode is Autofeed/Autocut. In this mode, the machine continuously feeds a pad of the length determined by the length timer, and then cuts it automatically. The feed cycle then begins again with no operator intervention.

The third mode is EDS operation. While in this mode, a sensor detects the presence of a pad in the output chute of the machine. When an operator removes the pad, another pad is fed out automatically, with a length determined by a length timer which is a

3 Position w/Counter KA-0303 Remote Box

This remote box is the same as a 3 position machine with the additional feature of a counter. The operator sets the counter to the number of pads to be made. When the number has been reached, autofeed operation is inhibited until the counter is reset.

3 Position w/Feed-Cut Footswitch KA-0304

This remote box is the same as a 3 position with the additional feature of feed-cut footswitch operation. When the operator selects feed-cut footswitch operation, the machine feeds out a pad while the footswitch is being depressed. Then the footswitch i

3 Position w/Footswitch/Counter KA-0305

This remote box is the same as KA-0304 with the additional feature of a counter. The operator sets the counter to the number of pads to be made. When the number has been reached, autofeed operation in all three modes in inhibited until the counter is re

Keypad KA-0306 Remote Box

The keypad is used by an operator to select one of 16 pad lengths from 10 to 78 inches. When one of the buttons is pressed, a pad of the selected length is dispensed and cut automatically. No other modes of operation such as footswitch, autofeed, EDS or

Pad-N-Pak[R] Workstation KA-0307

This remote box is designed to work with the Pad-N-pak[TM] workstation with or without shelves. It offers Autofeed and feed-cut footswitch operation. A "Miscut Indicator" lamp is provided to alert an operator that a pad was not cut correctly. The MA-00

Options for Autopad[R] Machines

• DS-0213 Double Roll Bracket (Left)
• DS-0214 Double Roll Bracket (Right)
• PP-0259 Jumbo Paper Roll Shaft
• KA-0001 15" Paper Kit
• KA-0024 Standard Caster Kit